Details

---

Heavy-Duty Signal Splitting: 6.35mm TS to Dual 6.35mm TS Audio Cable (1.5 /  3 Meter) 🎸🔊

Duplicate your sound without losing quality with our 6.35mm TS to Dual 6.35mm TS Audio Cable. This professional-grade "Y-splitter" is designed to take a single unbalanced mono signal and distribute it to two separate destinations simultaneously.

Whether you are running a guitar signal to two different amplifiers for a massive "wet/dry" setup or splitting a mono output to two mixer channels, this cable provides the reliability and signal clarity required for professional performance. Available in 1.5-meter and 3-meter lengths, it is the perfect solution for keeping your stage or studio wiring clean and efficient.

Key Performance Features:

• ✅ Precision Mono Splitting: Efficiently branches one 6.35mm (1/4 inch) TS mono plug into two 6.35mm TS mono plugs.

• ✅ High-Fidelity Signal Integrity: Engineered with high-quality internal conductors to ensure consistent audio levels across both split paths.

• ✅ Superior Shielding: Features dense internal shielding to protect against electromagnetic interference (EMI) and radio frequency interference (RFI) for a hiss-free signal.

• ✅ Rugged Construction: Built with professional-grade molded connectors and reinforced strain relief to withstand the mechanical stress of live touring.

• ✅ Flexible Matte Jacket: The high-durability PVC jacket is designed to be tangle-resistant and flexible enough to route through complex pedalboard or rack setups.

Technical Specs 🏗️

• Connector A: 6.35mm (1/4 Inch) TS Mono Male.

• Connector B: $2 \times$ 6.35mm (1/4 Inch) TS Mono Male.

• Available Lengths: 1.5 Meters / 3 Meters.

• Cable Type: Unbalanced Mono Y-Splitter.

• Jacket Material: Flexible High-Durability PVC.

• Color: Professional Matte Black.

Typical Applications 📋

• Dual-Amp Setups: Split a guitar or bass signal to drive two amplifiers simultaneously for a richer, layered soundstage.

• Mixer Routing: Send a single mono output from a keyboard or synthesizer to two separate channels on a mixing console.

• Signal Parallel Processing: Split an instrument signal to go directly to an amplifier while sending the second branch to a recording interface or DI box.

• Pedalboard Utility: Perfect for splitting signals within complex effect chains or parallel signal loops.

Top 3 Customer Questions & Concerns 🙋‍♂️

1. ⚡ Is this a stereo cable?

   • No, this is a Mono Splitter. It uses TS (Tip-Sleeve) connectors to duplicate a mono signal, not to carry a stereo (Left/Right) signal.

2. 🔧 Will splitting my signal make it quieter?

   • Because this is a passive split, you may notice a very slight drop in signal level depending on the input impedance of your connected gear, but for most high-impedance instrument applications, this is minimal.

3. 💪 Is the split point durable?

   • Yes, the Y-junction is protected by a heavy-duty molded housing that prevents the cables from fraying or pulling apart under tension.