Details

---

Versatile Connectivity: 3-in-1 Network Cable Tester (RJ11/45/BNC) 🛠️🌐

The BS-468P 3-in-1 Network Cable Tester is an essential diagnostic tool for IT professionals, network installers, and DIY enthusiasts alike. This comprehensive kit is designed to quickly and accurately verify the integrity of your network and communication lines, supporting RJ11 (telephone), RJ45 (Ethernet), and BNC (coaxial) connections.

The tester consists of two detachable components: a Master unit and a Remote unit. This configuration allows for convenient end-to-end testing of cables already installed through walls or across large rooms. Whether you are troubleshooting an existing network or certifying a new installation, the BS-468P provides the clarity needed to ensure every pin is correctly mapped.

Key Performance Features:

• ✅ 3-in-1 Testing Capability: Supports standard RJ45 networking cables, RJ11 telephone lines, and BNC coaxial cables with the included adapter.

• ✅ Detachable Remote Unit: Enables one person to test cables that are already routed through structures by placing units at opposite ends.

• ✅ Intuitive LED Display: Features 1-8 sequence LEDs plus a Ground (G) indicator on both units to visually confirm pin-to-pin mapping.

• ✅ Adjustable Test Speeds: Built-in power switch includes "ON" for standard speed and "S" for slow speed, allowing for careful observation of LED sequences.

• ✅ BNC Support Included: Comes equipped with a specialized BNC adapter to test coaxial video and data lines.

• ✅ Professional Design: Housed in a durable, high-impact black plastic casing with an ergonomic grip for comfortable field use.

Technical Specs 🏗️

• Model: BS-468P.

• Supported Ports: RJ45 (8P8C), RJ11 (6P4C/6P2C).

• External Support: BNC via included adapter.

• Power Control: 3-position switch (OFF / ON / S-Slow).

• Indicators: 9 Individual LEDs (1, 2, 3, 4, 5, 6, 7, 8, G) on Master and Remote units.

• Packaging: Retail blister pack for protection and storage.

Typical Applications 📋

• Network Installation: Verifying that Ethernet cables are crimped correctly and following T568A or T568B standards.

• Telecommunications: Testing multi-line telephone cables for continuity and shorts.

• Security & Surveillance: Utilizing the BNC adapter to check the integrity of coaxial cables for CCTV camera systems.

• Home Office Setup: Ensuring custom-length patch cables are functional before connecting them to sensitive equipment.

Top 3 Customer Questions & Concerns 🙋‍♂️

1. ⚡ Does this unit test for cable length or distance to a fault?

   • No, the BS-468P is a continuity and mapping tester; it identifies if pins are connected correctly, crossed, or open, but it does not measure cable length.

2. 🛡️ Can I use the "S" mode for more accurate testing?

   • Yes. The slow ("S") mode is specifically designed to help you catch momentary flickers or rapid miswires that might be harder to see at the standard "ON" speed.

3. 🔌 How do I test a BNC cable with this?

   • Simply plug the BNC adapter into the master unit and connect your BNC cable to it; the LED sequence will then confirm if the core and shield have continuity.